Show whole topic
Jun 08, 2011 8:27 am
Jun 08, 2011 8:27 am
Subject: Re: Scintilla NV6 for LG6; will an AV6 fit, what are differences?
Hi Laurence,
In my mag data I can only find a reference to the "existence" of an AV6 Scintilla, nothing else I am afraid.
However, the only important things in your case are,
1, it looks right,
2, the rotation is the same direction,
3, the automatic advance curve exactly matches the one you already have! This is the most important of all as it will damage your engine if not!
Only you can check these when you see the mag, it should say the info you need on the tag plate attached.
If all is correct. Timing should be set at 2500 rpm ( so all the advance is "in" ) and be 31 degrees BTDC on the exhaust side and 33 BTDC on the inlet.
Good luck,
Julian
Hi Laurence,
In my mag data I can only find a reference to the "existence" of an AV6 Scintilla, nothing else I am afraid.
However, the only important things in your case are,
1, it looks right,
2, the rotation is the same direction,
3, the automatic advance curve exactly matches the one you already have! This is the most important of all as it will damage your engine if not!
Only you can check these when you see the mag, it should say the info you need on the tag plate attached.
If all is correct. Timing should be set at 2500 rpm ( so all the advance is "in" ) and be 31 degrees BTDC on the exhaust side and 33 BTDC on the inlet.
Good luck,
Julian