Show whole topic
Aug 14, 2012 11:36 pm
Aug 14, 2012 11:36 pm
Subject: Re: Metalastic Bushes LG45 Saloon Restoration
As above,
The engine mount silent blocks should be bolted in from underneath so changing them is relatively easy if need be.
However! The alignment of your engine and gearbox must be absolutely spot on or your clutch will drag. If your mounting rubbers are not good then your engine will be forever moving and causing crunching selecting first and reverse. This is the first sign of mounting rubber failure / softness.
Regards,
Julian
As above,
The engine mount silent blocks should be bolted in from underneath so changing them is relatively easy if need be.
However! The alignment of your engine and gearbox must be absolutely spot on or your clutch will drag. If your mounting rubbers are not good then your engine will be forever moving and causing crunching selecting first and reverse. This is the first sign of mounting rubber failure / softness.
Regards,
Julian