Subject: Re: Power At Last

---

Hi Chris,
We are a little further now in so much as I have designed the crank etc and am sure we can see 2.8 litres,
We will need no major internal parts such as Crank Rods, Pistons or Camshafts, nor any chains or bearing backings etc. so all Main casings will be needed however it matters not what condition your bores are in or cylinder head condition etc as long as you don't have cracks etc. However even if yours is cracked (we crack test everything we re-use) then we can repair it to 100% perfect condition by certified welding.
What do you have?

Regards,
Julian