Show whole topic
Jan 10, 2018 2:43 pm
Jan 10, 2018 2:43 pm
Subject: Re: DB3 litre wheel chrome ring
Dear Hermann, I bought stainless steel rim embellishers, they look ok, chrome would be slightly nicer. This was in 2008, luckily I found the info in my old emails: I had measured on the original chrome ones: 430mm outer, 350mm inner diameter, when the ring is lying on the floor it is 25mm from floor to underside of the outer edge of the ring (about 28mm max height), the hole for the valve is very close to the inner edge of the ring. A former DB3ltr owner gave me the info that Austin A40 might be the same.
I ordered a set of 4, specification was: "Austin A40 Devon,Somerset S/S AceType Wheel Rim" they fit but mounting was very difficult, had to modify the brackets coming with it several times. I ordered from "a.m.classical.car.accessories" via ebay. Searching today for "Austin A40 rim" I find e.g. this: http://www.classiccarchrome.co.uk/...ishers-x-4-923-p.asp
They seem to have a different mounting now, not with loose single brackets but with teeth cut in, let us know if that fits
Dear Hermann, I bought stainless steel rim embellishers, they look ok, chrome would be slightly nicer. This was in 2008, luckily I found the info in my old emails: I had measured on the original chrome ones: 430mm outer, 350mm inner diameter, when the ring is lying on the floor it is 25mm from floor to underside of the outer edge of the ring (about 28mm max height), the hole for the valve is very close to the inner edge of the ring. A former DB3ltr owner gave me the info that Austin A40 might be the same.
I ordered a set of 4, specification was: "Austin A40 Devon,Somerset S/S AceType Wheel Rim" they fit but mounting was very difficult, had to modify the brackets coming with it several times. I ordered from "a.m.classical.car.accessories" via ebay. Searching today for "Austin A40 rim" I find e.g. this: http://www.classiccarchrome.co.uk/...ishers-x-4-923-p.asp
They seem to have a different mounting now, not with loose single brackets but with teeth cut in, let us know if that fits