Show whole topic
Aug 07, 2019 10:15 am
Aug 07, 2019 10:15 am
Subject: M45 Tourer Screen Frame Advice
I need to strip down the screen frame on my M45 tourer for rechroming and glass replacement.
As far as I can assess the top rail and sides do not come apart and would be rechromed as one piece. Is this correct?
If so,then I have to remove the bottom curved rail to remove the glass. There are two steel screws on each side about 30mm from the base and what looks like a 'brass dowel' in each bottom corner but no slot for unscrewing this.
I have drilled out the steel screws as they were heavily rusted but the frame remains solidly together!
I am now considering drilling out the 'brass dowel'. But am I correct in doing this?
As ever advice gratefully received
Regards
Mark
I need to strip down the screen frame on my M45 tourer for rechroming and glass replacement.
As far as I can assess the top rail and sides do not come apart and would be rechromed as one piece. Is this correct?
If so,then I have to remove the bottom curved rail to remove the glass. There are two steel screws on each side about 30mm from the base and what looks like a 'brass dowel' in each bottom corner but no slot for unscrewing this.
I have drilled out the steel screws as they were heavily rusted but the frame remains solidly together!
I am now considering drilling out the 'brass dowel'. But am I correct in doing this?
As ever advice gratefully received
Regards
Mark