Lagondaforum

Lagondaforum » Other » Electrics » 14/60 HC Dynamo drive.

Hello Guest! (New posts) Forum


Expand and collapse Topic Options
Pages (1): [1]
 Show first unread post

Apr 16, 2018 4:30 pm
Steve Darnell Offline
Member
Registered since: Sep 25, 2017
Location: -


Subject: 14/60 HC Dynamo drive.
My 14/60 dynamo has a steel disc at the dynamo end of the drive shaft. The other end has a Flex Drive. The steel disc is broken, but the Club don't list a replacement.

I have the facilities to make a new one, but need advice as to the best metal/material to use.

Unless someone has a spare...
 

Apr 16, 2018 8:07 pm
Colin M34 Offline
Member
Registered since: Dec 01, 2007
Location: Suffolk, UK


Subject: Re: 14/60 HC Dynamo drive.
Hi Steve

I have the same arrangement. I think a nice piece of spring steel would do the job. You will have to drill it fairly accurately and then bolt it up.

Colin M34
 

Apr 19, 2018 7:57 am
Steve Darnell Offline
Member
Registered since: Sep 25, 2017
Location: -


Subject: Re: 14/60 HC Dynamo drive.
Took the dynamo off altogether and... When I'd had the cradle bolts replaced with larger ones, and the holed re-drilled & re-tapped, I'd failed to notice that the new bolt head were stopping the dynamo being a snug fit in the cradle. Half an hour with the mini-grinder, and now the shaft alignment is spot-on! The joys of old motors... Angel
 

Pages (1): [1]

Related Topics


Impressum Credits
All times are GMT