Lagondaforum

Hello Guest! (New posts) Forum


Expand and collapse Topic Options
Pages (1): [1]
 Show first unread post

Sep 15, 2015 4:48 pm
Radman Offline
Member
Registered since: Sep 03, 2015
Location: -


Subject: BT-H Magneto CE6
I have a CE6 Form D2R magneto for sale. It has been stored for 50 years plus but appears in remarkably good order when stripped and produces a fat spark when flicked. Some photos at http://www.cmengines.co.uk -
Thought it was good for LG45 but not sure now...offers invited...
 

Sep 16, 2015 8:55 am
Colin M34 Offline
Member
Registered since: Dec 01, 2007
Location: Suffolk, UK


Subject: Re: BT-H Magneto CE6
The BTH CE6 magneto is a very nice unit, often fitted to the Meadows engine in an M45.

However most LG45s used a pair of Scintilla vertex units in tandem. These are mounted on the nearside of the engine. So this CE6 unit would suit an M45 or Invicta, assuming it is a 3/4 engine speed unit not a 2/3 one used on a Three Litre.

Colin
 

Sep 16, 2015 10:30 am
Rich5ltr Offline
Member
Registered since: Jul 07, 2015
Location: Hampshire, UK


Subject: Re: BT-H Magneto CE6
Going off at a tangent, how does a magneto running at 3/4 or 2/3 engine speed provide the spark at the right time? Or, doesn't the magneto control the timing?
Richard Branch
 

Sep 16, 2015 1:40 pm
davidbracey Offline
Member
Registered since: Aug 10, 2012
Location: Maidstone, Kent


Subject: Re: BT-H Magneto CE6
Good question Rich. I had always assumed that it was down to the worm gear on the end of the magneto shaft and that you would simply use a different gear. No?
David Bracey
 

Sep 17, 2015 6:04 pm
bill Offline
Member
Registered since: Jun 08, 2011
Location: -


Subject: Re: BT-H Magneto CE6
I think you will find that the 3/4 speed is achieved by the gearing inside the magneto - hence a 3 litre 3/4 engine speed magneto being of the "hens teeth" variety and value - the last one I saw was £2500 I think !
With the greatest of respect Colin I think that the 3 litre engine magneto is 3/4 engine speed not 2/3 - at least it was on my 3 litre and every other 3 litre I came across ! The 3 litre used a "Scintilla MN6 -3/4" I think ?
 

Sep 18, 2015 1:55 am
alecrb Offline
Member
Registered since: Dec 05, 2007
Location: Vancouver, Canada


Subject: Re: BT-H Magneto CE6
My reprint of a Scintilla manual notes that the magnetos deliver two sparks per rev, so a six cylinder magneto has to be driven at 1.5 times engine speed. It also notes that for engines working on a two stroke cycle, twice as many sparks per revolution have to be delivered. They therefore made magnetos marked MN4 1/2, GN4 1/2, MN6 3/4, and GN6 3/4 with 4 sparks per rev, so they can be driven at the same engine speed as the conventional magnetos on four stroke engines. I suppose you could run one of these special magnetos on a four stroke - you would adding a spark just as the exhaust stroke was finishing, which I don't think would do any harm.
The gearing inside the magneto is to match the magneto speed to the distributing rotor, so it would be 2:1 on a four cylinder and 3:1 on a six.
I'm getting this information from the manual - I don't have a PN6 to look at as my car has a more modern Fairbanks-Morse.
Alec
Alec Rivers-Bowerman
 

Sep 18, 2015 6:18 am
alecrb Offline
Member
Registered since: Dec 05, 2007
Location: Vancouver, Canada


Subject: Re: BT-H Magneto CE6
It just occurred to me that the engine designer might have chosen to use the two-stroke type magneto (MN6 3/4) and run it at half the speed that a MN6 would need. I checked the club's Vintage Lagonda Handbook, and it does state that the 3 litres did use the MN6 3/4 magnetos and that they run at 3/4 engine speed.
Alec
Alec Rivers-Bowerman
 

Sep 18, 2015 11:38 am
Rich5ltr Offline
Member
Registered since: Jul 07, 2015
Location: Hampshire, UK


Subject: Re: BT-H Magneto CE6
Thanks for the explanations about speeds, it is all starting to make sense to me now! Smiling
Richard Branch
 

Pages (1): [1]


All times are GMT