Lagondaforum

Hello Guest! (New posts) Forum


Expand and collapse Topic Options
Pages (1): [1]
 Show first unread post

Mar 29, 2008 6:14 pm
H 54 John Offline
Member
Registered since: Dec 09, 2007
Location: East Sussex, UK


Subject: Scews missing...
Anyone know the sizes etc of the 2 screws that secure the cap on the inboard end of the steering column (i.e. the cap carrying the horn button)? Both are missing on my car and the insulating tape holding the cap in place is hardly concours...

Thanks!

John
John Hugh
 

Apr 10, 2008 8:24 pm
Brian Savill Offline
Member
Registered since: Dec 04, 2007
Location: -


Subject: Re: Scews missing...
Hi John.
You do not state what model. I do know that the later 2 Litre and 16/80 has 4 screws that secure the boss that the horn button fits in. They are 3/16 inch Whit. (24 TPI) 5/8 long C/SK screws.
Hope this helps.
Regards, Brian. (S28)
 

Apr 11, 2008 10:47 am
H 54 John Offline
Member
Registered since: Dec 09, 2007
Location: East Sussex, UK


Subject: Re: Scews missing...
Thanks very much Brian. The car is a 1928 high chassis tourer. I'll try the Whitworths asap.

John
John Hugh
 

May 15, 2008 6:48 pm
H 54 John Offline
Member
Registered since: Dec 09, 2007
Location: East Sussex, UK


Subject: Re: Scews missing...
Just to conclude this thread - in the early 2 litres (14/60 and HC tourer anyway), the 2 screws securing the cap are 5 BA (at least these worked for me, without obvious thread graunching..)

John
John Hugh
 

Pages (1): [1]

All times are GMT