Lagondaforum

Hello Guest! (New posts) Forum


Expand and collapse Topic Options
Pages (1): [1]
 Show first unread post

Mar 09, 2019 8:33 pm
Lagonda1928 Offline
Member
Registered since: Sep 26, 2010
Location: -


Subject: Main / Reserve Fuel Switch
Bishopgray have recently done an excellent job refurbishing the Autovac on my 2 Litre High Chassis but this has now revealed that the main/reserve fuel switch (picture attached) is leaking as the internal cork gaskets have reached the end of their life. They are 3/4 inch diameter and one is maybe 1mm thick and the other around 6mm.
I was wondering if anyone knows anyone that supplies replacement gaskets for this application ( I think that the club ones are a lager diameter) or a supplier of a suitable material (nitrile rubber ?) from which I can make some ? If anyone can confirm the exact initial thicknesses that would also be useful as its difficult to tell from whats left of mine.


Thumbnails of attached images:

Filename: Main Reserve Switch.JPG
Filetype: File Type Information for: jpg jpg
Downloads: 988
Filesize: 109.33 KB
Image size: 640 x 480 Pixels

Filename: Main Reserve Fuel Switch 2.JPG
Filetype: File Type Information for: jpg jpg
Downloads: 1029
Filesize: 105.57 KB
Image size: 640 x 480 Pixels

 

Mar 24, 2019 11:08 am
H 54 John Offline
Member
Registered since: Dec 09, 2007
Location: East Sussex, UK


Subject: Re: Main / Reserve Fuel Switch
I've the same problem and have (temporarily I hope) replaced the elegant original switch with one of the commercially available Enots c/o taps. It does the job but looks very wrong. Have you had any responses or suggestions? It seems odd that the corks for the larger tap are readily available but not for the one used on the 14/60 and Speed models.
John Hugh
 

May 23, 2020 6:39 pm
GrahamSw Offline
Member
Registered since: Dec 06, 2014
Location: Canterbury


Subject: Re: Main / Reserve Fuel Switch
Hi gentlemen,
I have my fuel system down presently and am also considering the condition of this valve. Did either of you solve the problem of gaskets?
Thanks
Graham
Graham Swindley
 

May 23, 2020 6:40 pm
GrahamSw Offline
Member
Registered since: Dec 06, 2014
Location: Canterbury


Subject: Re: Main / Reserve Fuel Switch
Hi gentlemen,
I have my fuel system down presently and am also considering the condition of this valve. Did either of you solve the problem of gaskets?
Thanks
Graham
Graham Swindley
 

May 30, 2020 11:27 pm
Lagonda1928 Offline
Member
Registered since: Sep 26, 2010
Location: -


Subject: Re: Main / Reserve Fuel Switch
I would suggest that you might try contacting Bishopgray and see if they can help you.

There is another potential issue with the fuel switch in that the internal hole diameters are slightly too small and can restrict fuel flow particularly when running for long periods with large throttle openings such as on a Motorway... which probably wasnt a big problem in the 1920's ! While you are working on the switch, unless this has already been done, it might also be worthwhile trying to see if you can get the holes enlarged.
 

May 31, 2020 2:06 pm
GrahamSw Offline
Member
Registered since: Dec 06, 2014
Location: Canterbury


Subject: Re: Main / Reserve Fuel Switch
Quote by Lagonda1928:
I would suggest that you might try contacting Bishopgray and see if they can help you.

There is another potential issue with the fuel switch in that the internal hole diameters are slightly too small and can restrict fuel flow particularly when running for long periods with large throttle openings such as on a Motorway... which probably wasnt a big problem in the 1920's ! While you are working on the switch, unless this has already been done, it might also be worthwhile trying to see if you can get the holes enlarged.
Thanks for this. Graham
Graham Swindley
 

Pages (1): [1]


All times are GMT