Lagondaforum

Hello Guest! (New posts) Forum


Expand and collapse Topic Options
Pages (2): [1][2]
 Show first unread post

Jun 13, 2011 5:56 pm
bruffsup Offline
Member
Registered since: Aug 08, 2010
Location: Canada


Subject: Are my M45 backing plates designed for cycle mudguards?
Can someone please explain what is the function of the drilled flange. If indeed cycle wings were fitted they would then turn with the wheel. Surely this is not the purpose. Mystified yet again. Thanks, Barry

Thumbnails of attached images:

Filename: LAG BACKING PLATE.jpg
Filetype: File Type Information for: jpg jpg
Downloads: 1244
Filesize: 57.42 KB
Image size: 640 x 480 Pixels


Barry Brown
Barry Brown
Bedford Mills Ontario Canada
 

Jun 13, 2011 11:33 pm
eddie bourke Offline
Member
Registered since: Feb 21, 2010
Location: -


Subject: Re: Are my M45 backing plates designed for cycle mudguards?
Hi Barry,
I have seen these used on M45's and they were also used on the 3L 's that had cycle wings fitted. Never saw a M45 with cycle wings fitted this way and think that they had a good stock of these backplates to use up when the M45 went in to production.
Eddie.
 

Jun 14, 2011 12:01 am
bruffsup Offline
Member
Registered since: Aug 08, 2010
Location: Canada


Subject: Re: Are my M45 backing plates designed for cycle mudguards?
Thanks for the quick reply Eddie . Much appreciated.
Barry Brown
Barry Brown
Bedford Mills Ontario Canada
 

Jun 18, 2011 7:44 pm
daveroberts Offline
Member
Registered since: Aug 30, 2009
Location: -


Subject: Re: Are my M45 backing plates designed for cycle mudguards?
Barry,

My 1935 M45 ST34 pillarless saloon is fitted with cycle front mudguards, supported by the flange on the backplate, and a second flange on a boss near the king pin. Hope this helps.

Regards...Dave.
 

Jun 19, 2011 12:51 pm
Colin M34 Offline
Member
Registered since: Dec 01, 2007
Location: Suffolk, UK


Subject: Re: Are my M45 backing plates designed for cycle mudguards?
Hi Dave,

An M45 ST34 pillarless saloon with long wings looks pretty good. I would imagine that with cycle front mudguards it looks spectacular!

Can you post a picture of it on this site?

Colin M45
 

Jun 21, 2011 11:35 am
daveroberts Offline
Member
Registered since: Aug 30, 2009
Location: -


Subject: Re: Are my M45 backing plates designed for cycle mudguards?
Hi Colin,

details of my M45 are as follows :-

Reg No . VJ 6739
Type M45. ST34
Engine No. 2893
Car no. Z11143

I have several photo's of the car whenI acquired it some years ago. They clearly show the helmet front wings, mounted on the backplates and the ski style of running board, also present on a ST24. Unfortunately time, woodworm. and accident damage had reduced the pillarless bodywork to the scuttle and bonnet.

i prefer wind in what is left of my hair motoring, so I have built a T2 body minus the side skirts. It will look like Geoff Seatons wonderful 3 litre tourer when finished. Yes, it yet another bloody tourer. However, I do have a saloon body within reach, that I could fit to the chassis now and again to keep the purists happy. I see in Holthausen's tome on the 4 i/2 litre , illustrations of ST24 and ST34, and apparentlySTt34 cars were available with the short or helmet or cycle wing to special order.
Maybe my car is, or was a rarity.

I will scan the photos shortly when i have worked out how to on my new scanner. Hope this helps.

Regards...Dave.



 

Jun 24, 2011 1:08 pm
daveroberts Offline
Member
Registered since: Aug 30, 2009
Location: -


Subject: Re: Are my M45 backing plates designed for cycle mudguards?
Hi Colin,
I have had trouble compressing the photo files down to less than 200 Kb to upload to the forum, so I have sent then to you to forward if you have the knack. Please forgive the shot showing it as LHD!
However, you can see the louvred panel below the scuttle not present on long wing cars. as you can see, there was not a lot of the original body, merely the scuttle and the base framework bolted to the chassis with numerous outriggers.

I was restoring a low chassis 2 litre at the time and I needed somewhere to park the body whilst the chassis was being worked on, and was most surprised that it fitted the Z chassis when placed on top. The extra 9" of wheelbase on the Z chassis is found in the bonnet length.

Dave

 

Jun 24, 2011 9:18 pm
daveroberts Offline
Member
Registered since: Aug 30, 2009
Location: -


Subject: Re: Are my M45 backing plates designed for cycle mudguards?
Hi Colin,

The remains of my M45 ST34 with helmet front wings, as requested.

Regards...Dave
 

Jun 27, 2011 8:26 am
Colin M34 Offline
Member
Registered since: Dec 01, 2007
Location: Suffolk, UK


Subject: Re: Are my M45 backing plates designed for cycle mudguards?
Here are Dave’s photos. Very interesting! We have to remember several rules with Lagondas – firstly, a customer could have anything they wanted. and secondly, no two Lagondas are alike so you will always find an exception to prove the rule.

To my eyes, the cycle wings and ski running boards on Dave’s car look pretty original. This is supported by the fact that the headlamp bracket assembly is braced as per cycle winged cars. Also note that these wings turn with the wheels compared with helmet wings often fitted to ST24 cars. Now it gets confusing. The ski running boards were normally supplied to cars with fixed helmet wings. These do not move with steering whereas the cycle wings do and cars with these wings cars normally had short running boards.

So here are my thoughts. Perhaps a customer was upgrading from an earlier car and liked cycle wings. I’m sure the sales man would be very happy to agree to an unusual specification, or being 6 months from bankruptcy in 1935, perhaps the factory had some cycle wing kits left over and made this as a special edition to clear the stock. Or maybe the car might have had a crash early in its life and was repaired locally or went back to the factory to be fitted with a new or second hand cycle wing kit.

Whatever the reality is, these are clearly original Lagonda made wings which have been on the car for a long time.

Dave’s chassis number is Z11143 which is one car later than my M45 saloon number Z11142. Both of our cars were ST34 bodies and I have posted a picture of my car taken around 1937 which has the normal long wings. Curiously, Dave’s car was registered in mid November 1934 whereas mine was not registered till mid April 1935, four months later. Perhaps mine was a demonstrator on trade plates or maybe simply hung around unsold in a dealer’s showroom.

Dave, thanks for the photos. I look forward to seeing your M45 in its new cycle-winged tourer guise. For me, part of the fun with Lagondas is tracking down quirks such as these.



Thumbnails of attached images:

Filename: 11143.jpg
Filetype: File Type Information for: jpg jpg
Downloads: 1190
Filesize: 171.43 KB
Image size: 814 x 668 Pixels

Filename: 11143_1.jpg
Filetype: File Type Information for: jpg jpg
Downloads: 1324
Filesize: 198.94 KB
Image size: 1790 x 1198 Pixels

Filename: 11143_21.jpg
Filetype: File Type Information for: jpg jpg
Downloads: 1274
Filesize: 199.41 KB
Image size: 1783 x 1198 Pixels

Filename: 11143_3.jpg
Filetype: File Type Information for: jpg jpg
Downloads: 1215
Filesize: 199.84 KB
Image size: 1789 x 1194 Pixels

Filename: m45 in 1937 -1.jpg
Filetype: File Type Information for: jpg jpg
Downloads: 1212
Filesize: 199.54 KB
Image size: 1898 x 1152 Pixels

This post has been edited 3 times. Last edit on Jun 27, 2011 8:42 am by Colin Mallett.  

Jun 28, 2011 7:21 am
Peter S30 Offline
Member
Registered since: Nov 27, 2007
Location: Germany


Subject: Re: Are my M45 backing plates designed for cycle mudguards?
Just one remark: the ski type running boards (you find pictures in Arnold Daveys books or Holthusen or others) were bent upwards on the front end (that´s why they are called so). The running boards here are bent down in a strange way.
 

Pages (2): [1][2]


All times are GMT