Lagondaforum

Hello Guest! (New posts) Forum


Expand and collapse Topic Options
Pages (1): [1]
 Show first unread post

May 31, 2012 7:07 pm
SRD Offline
Member
Registered since: Mar 12, 2012
Location: -


Subject: Window opening for 1st time in 40 years
With door panels off, I have had a first opportunity to assess electric motors.

This picture shows the manual window winder on the passenger side front door motor winder.

This was very well greased and turned reasonably easily, with no rust to it either, let the window down several inches, after breaking initial resistance from rubber seals.

I had expected it to be siezed and was very pleased that it could turn, all helical gears in good order, cleaned them up to check for damage or wear, they are like new.

Will pull these all out shortly and assess overall condition.

Thumbnails of attached images:

Filename: Winodw Winder.jpg
Filetype: File Type Information for: jpg jpg
Downloads: 847
Filesize: 54.66 KB
Image size: 1700 x 1018 Pixels

Filename: Open Window.jpg
Filetype: File Type Information for: jpg jpg
Downloads: 842
Filesize: 43.89 KB
Image size: 1500 x 1256 Pixels


This post has been edited 2 times. Last edit on May 31, 2012 9:21 pm by SRD.  

Mar 19, 2013 1:56 pm
randall977 Offline
Member
Registered since: Oct 29, 2010
Location: Oxfordshire


Subject: Re: Window opening for 1st time in 40 years
I missed this tread. That's good news, mine were beyond help - I think refurbished motors are around £600 each!
Christian
 

Mar 19, 2013 4:36 pm
David Offline
Member
Registered since: Feb 05, 2011
Location: -


Subject: Re: Window opening for 1st time in 40 years
I think I paid around £100 each to have mine refurbished, but no guarantee (one doesn't work again)
 

Mar 20, 2013 12:05 pm
SRD Offline
Member
Registered since: Mar 12, 2012
Location: -


Subject: Re: Window opening for 1st time in 40 years
This post does seem a long time ago.

All my four motors had been removed from the doors. Aside from removing all the old grease which had become a little hard, and then re-greasing, all of my four motors work fine. I was very fortunate, most people I have spoken to have told me that these motors are often problematic, even after paying for refurbishment.

I have also removed the chains and de-gunked and de-greased them as well and associated sprockets, then regreased.

When I start to check and rewire as needed, I will rewire all four motors, one can't trust 50 year old wiring.
 

Pages (1): [1]


All times are GMT