Lagondaforum
Main Menu
Forums
Why this Forum ?
How to use ?
Literature
Some links
Forum Rules
Impressum
Lagondaforum
»
Other
» 3 improvements or faults corrected on my DB3ltr
Hello Guest! (
New posts
)
Forum
Search
Team
Important Tools
Misc. links
Mark forums read
Guidelines
Active topics...
in the last 24 hours
Newsfeeds (RSS, ...)
RSS 2.0
RSS 0.91
RSS 1.0
HTML
Klipfolio
Atom 1.0
Log in
Peter S30
Member
Registered since: Nov 27, 2007
Location: Germany
Subject:
3 improvements or faults corrected on my DB3ltr
In the beginning the car often stopped after some more demanding driving or when slow in towns. Reason was overheating of the coil ! since I moved it up (see photo) no more such problems
I replaced one of the 6V batteries by a black wooden box (see photo) made to fit and run with only one modern (but black)12V batterie. These modern batteries are more powerful per volume so this one has about the same capacity as the two 6V ones and one 12V is cheaper than only one 6V.
For the second time now I had air leakage through the suction tubing to the windscreen wiper reservoir (driven by vacuum from the suction of the engine) This tubing is becoming brittle. This smal tubing is next to the vacuum to the brake servo (see photo). Result of leakage is uneven running when idling.
Thumbnails of attached images:
Filename: coil moved-DB3ltr.JPG
Filetype:
jpg
Downloads: 627
Filesize: 34.54 KB
Image size: 1024 x 680 Pixels
Filename: box-DB3ltr.JPG
Filetype:
jpg
Downloads: 643
Filesize: 72.34 KB
Image size: 1024 x 680 Pixels
Filename: vacuum lines-DB3ltr.JPG
Filetype:
jpg
Downloads: 649
Filesize: 48.47 KB
Image size: 1024 x 680 Pixels
This post has been edited
1
times. Last edit on Sep 16, 2013 2:18 pm by Peter Schirg.
h14
Member
Registered since: Nov 30, 2008
Location: Chalandray, France
Subject:
Re: 3 improvemants or faults corrected on my DB3ltr
Hi Peter,
I'd suggest you carry a spare coil as this may be indicative of a developing problem with the coil itself. If it's a new coil, I'd be tempted to replace it with the original, if that was working fine. Unfortunately many modern replacement electrical products for our cars prove unreliable...particularly it seems voltage regulators and rotor arms.
Laurence
Peter S30
Member
Registered since: Nov 27, 2007
Location: Germany
Subject:
Re: 3 improvemants or faults corrected on my DB3ltr
Dear Laurence,
I first echanged the coil in the original position and the problem was the same, then I put another new coil in the new position.
At least the coil has an easyer life there because where it sits originally it is a very hot place and then of course it heats up a bit more itself by the current flowing. May be coils from the 50s and 60s were better made to stand high temperatures.
Some spare parts are in my battery replacing box, some more in the trunk..
This post has been edited
2
times. Last edit on Sep 16, 2013 10:05 am by Peter Schirg.
SRD
Member
Registered since: Mar 12, 2012
Location: -
Subject:
Re: 3 improvemants or faults corrected on my DB3ltr
Peter hi
This is a very common problem with the 3.0 litre. The engine bay actually gets very hot from my limited experience and talking to other owners, it is a well documented problem
Many people have moved their coil, and too good effect.
As for new replacement coils, I have several nos ones. Have given up with new ones, after trying two, both of which have proved to be unreliable.
Nice pictures of your car by the way !
Simon
http://www.Lagonda-Rapide.com
http://www.DB-Lagonda.com
Export
Printer friendly version
Show PDF file
showtopic_options_word
Misc. links
Mark forums read
Guidelines
Active topics...
in the last 24 hours
Newsfeeds (RSS, ...)
RSS 2.0
RSS 0.91
RSS 1.0
HTML
Klipfolio
Atom 1.0
Impressum
Credits
All times are GMT
Viscacha 0.8 RC3
Copyright © by MaMo Net